Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of a Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Key

The procedure to replace the battery of the remote key for a Land Rover Evoque requires a few simple steps. Before you start, make sure you have the necessary materials, specifically a flat CR 2032 3V battery. Take the key fob of your vehicle and first extract the metal key inside: to do this, press the button on the top edge of the fob and then pull the key outwards. Next, insert the tip of the key into the slot on the top edge of the fob and pry it open; remove the old battery and proceed to replace it.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Land Rover Evoque
How to Replace the Battery in a Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the battery in a Land Rover Evoque, open the hood to access the engine compartment and locate the battery on the right side of the engine …
How to Replace the Remote Battery in a Land Rover Evoque?
How to Replace the Remote Battery in a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the remote battery in a Land Rover Evoque, first open the remote. Remove the chrome cover with the RANGE ROVER lettering to insert a lever…
How to Replace the Key Fob Battery for the Land Rover Evoque?
How to Replace the Key Fob Battery for the Land Rover Evoque?
Land Rover Evoque (2018-2026 / L551, MK 2) In this tutorial, you will see how to replace the key fob battery for the Land Rover Evoque, a very simple and quick operation. You will only need a …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos