Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Land Rover Range Rover MK 2 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Cabin air filter

See other generations:
Video tutorial

The proposed car model is equipped with two cabin air filters, one on the driver's side and one on the passenger's side: both are located outside the cabin, specifically just below the windshield, each corresponding to the wiper arm attachment; to replace the filters, open the hood and remove the screws securing the filter cover, pull out the old filter, ensure there are no dirt residues inside the housing, and insert the new filter (activated carbon filters are recommended), then reattach the cover and secure it with the screws.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Range Rover
How to replace the cabin air filter of the Range Rover
Land Rover Range Rover (2012-2021 / MK 2) Today we will replace the cabin air filter of the Range Rover. The filter is located inside the cabin under the driver's side glove compartment, so t…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Land Rover Range Rover (1994-2002 / MK 2) The vehicle in question has two cabin air filters, one on the driver's side and the other on the passenger's side, located externally to the cabin ju…
Replacing the Cabin Air Filter on a Land Rover Range Rover
Land Rover Range Rover (2012-2021 / MK 2) To ensure that the air from the air conditioning system in the Land Rover Range Rover is always clean, you need to periodically replace the dedicated…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos