Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : Cabin air filter replacement

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover MK 2 - Years 1994-2002
Part: Cabin air filter
Operation: Cabin air filter replacement

The car in question has two cabin air filters, one on the driver side and the other on the passenger side, and they are located outside the passenger compartment, immediately under the windscreen, both in correspondence with the attachment of the wiper blades; therefore open the front hood and remove the plastic grille that fixes the cap of the passenger compartment air filter container, on both sides; then extract the used filters, make sure that there are no dirt residues inside their respective seats and insert the new ones respecting the direction of the air flow indicated by the arrows.


Posted on 29 August 2023 by ScegliAuto



Cabin air filter replacement
Land Rover Range Rover (1994-2002 / MK 2) The proposed car model is equipped with two cabin air filters, one on the driver's side and one on the passenger's side: they are both located outsid
Replacement of the cabin air filter of the Land Rover Range Rover
Land Rover Range Rover (2012-2021 / MK 2) To ensure that the air in the air conditioning system of the Land Rover Range Rover is always clean, it is necessary to periodically replace the dedi
How to replace the Range Rover Sport cabin filter
Land Rover Range Rover (2002-2012 / MK 3, L322) Replacing the cabin air filter on your Range Rover Sport third series (year 2002-2012) is a very simple operation and takes just a few minutes to com

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos