Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Range Rover Sport

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin air filter on your third-generation Range Rover Sport (2002-2012) is a very simple task and takes just a few minutes to complete successfully. Here’s how to do it. First, turn off the vehicle completely and park it safely.

Then, go to the passenger side and open the glove compartment. Release the safety latch located on the left side and remove the glove compartment.

At this point, locate the filter box and remove the cover. Replace the filter and you are done.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Land Rover Range Rover Sport?
How to Replace the Cabin Filter in the Land Rover Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) To replace the cabin filter in the Land Rover Range Rover Sport, press the designated button on the dashboard to open the glove compartment on the pa…
Replacing the Fuel Filter on a Land Rover Range Rover Sport
Replacing the Fuel Filter on a Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) In this guide, we will see how to remove and replace the fuel filter on a Land Rover Range Rover Sport by following these simple steps. First, lift t…
How to Replace the Cabin Filter in the Land Rover Range Rover Sport L332?
How to Replace the Cabin Filter in the Land Rover Range Rover Sport L332?
Land Rover Range Rover (2002-2012 / L322, MK 3) To replace the cabin filter in the Land Rover Range Rover Sport L332, open the glove compartment on the passenger side and detach the two side pins t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos