Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : How to disassemble the factory radio of the Land Rover Range Rover Sport

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover MK 3, L322 - Years 2002-2012
Part: Car stereo
Operation: How to disassemble the factory radio of the Land Rover Range Rover Sport

Today we will discover the instructions that will allow us to disassemble and replace the standard radio of the Land Rover Range Rover Sport. First of all, we get into the car and start by removing the plastic cover with the radio controls that we find under the display, unscrewing the fixing screws with a key or Torx T20 screwdriver; then we disconnect the electrical wiring to also remove the display, as shown in the video. At this point, we replace and install the new multimedia system, compatible with our car, following the video tutorial until the end for reassembly!


Posted on 18 May 2024 by ScegliAuto



How to disassemble the car stereo of a Land Rover Range Rover Sport 2
Land Rover Range Rover (2002-2012 / MK 3, L322) How to disassemble the original car stereo on a Land Rover Range Rover Sport 2? Let's see carefully in this video how to perform the disassembly. Wit
Land Rover Range Rover Sport Timing Belt Replacement Guide
Land Rover Range Rover (2012-2021 / MK 2) In this short guide we will see the main instructions on how to disassemble and replace the timing belt of the Land Rover Range Rover Sport. First of
How to reset the service in the Land Rover Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) In this video we can see how to reset the service warning light in the Land Rover Range Rover Sport. This simple operation must obviously only be car

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos