Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Factory Radio from a Land Rover Range Rover Sport 2

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

How do you remove the factory radio from a Land Rover Range Rover Sport 2? Let's carefully see how to perform the removal in this video. Remove the screws around the perimeter of the radio using a screwdriver.

Then, take out the buttons as shown in the video (along with the power cable) using a plastic or metal lever. Finally, remove the factory radio (disconnect the various power harnesses) and the ventilation control panel.

Lastly, install your preferred radio in the dashboard (using a proper trim adapter if not original) of the vehicle.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Remove the Stock Radio from the Land Rover Range Rover Sport
How to Remove the Stock Radio from the Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) Today, let’s go over the instructions to remove and replace the stock radio from the Land Rover Range Rover Sport. First, get inside the vehicle and …
How to Remove an OEM Radio from a Land Rover Range Rover
How to Remove an OEM Radio from a Land Rover Range Rover
Land Rover Range Rover (1994-2002 / MK 2) How to remove an OEM radio from a Land Rover Range Rover? Let's carefully see in this video how to perform the removal following the guidelines. Use …
Replacing the Battery in the Land Rover Range Rover Sport
Replacing the Battery in the Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) Today, let's go through the instructions to remove and replace the battery in the Land Rover Range Rover Sport. First, open the trunk and start by re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos