Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light in a Lexus NX 300h?

Model: Lexus NX Az20, MK 2 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Warning light – error code

See other generations:
Video tutorial

Resetting the tyre warning light in a Lexus NX 300h, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure you have restored the correct pressure in each tyre following the instructions in the manual.

Start by going inside the cabin, then turn on the instrument panel and, using the directional buttons on the steering wheel, navigate to the settings menu. Next, enter "Vehicle Settings", move the selector to "TPMS", and perform the reset by holding down the "OK" button.

Finally, restart the instrument panel.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Lexus NX 300h?
How to Reset the Tyre Pressure Light on a Lexus NX 300h?
Lexus NX (2014-2021 / MK 1) In this tutorial, you will learn how to reset the tyre pressure light on a Lexus NX 300h. This operation is extremely simple and quick, to be perform…
How to reset the tire pressure light in the Lexus NX 300h?
How to reset the tire pressure light in the Lexus NX 300h?
Lexus NX (2014-2021 / MK 1) In this tutorial, we can see how to reset the tire pressure warning light in the Lexus NX 300h, an extremely simple and quick operation, to be done o…
How to Reset the Tyre Pressure Light on the Lexus NX 300h
How to Reset the Tyre Pressure Light on the Lexus NX 300h
Lexus NX (2014-2021 / MK 1) In this tutorial, you will see how to reset the tyre pressure light on the Lexus NX 300h, a very simple and quick operation to be performed only afte…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos