Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Lexus NX key remote control

Model: Lexus NX MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

These simple steps will show us how to disassemble and replace the battery of the key fob for the Lexus NX. First, we take our key fob and begin by removing the physical key from inside it; we use the slot created to open the key fob in two parts, thus accessing the electronic board and the battery, as shown in the video.

At this point, we remove the old battery and replace it with a new one of the correct type (in this case a CR 2032 3V); we insert it in the correct direction and reassemble the key fob, checking the functionality of the buttons.


Posted on 6 December 2024 by ScegliAuto


Related tutorials

Replacement of the Lexus NX key remote battery.
Replacement of the Lexus NX key remote battery.
Lexus NX (2021-2026 / Az20, MK 2) Below we will see the procedure for disassembling and replacing the battery of the key remote for the Lexus NX. First, take our remote control and be…
Guide to Replacing the Key Remote Battery of the Lexus NX
Guide to Replacing the Key Remote Battery of the Lexus NX
Lexus NX (2014-2021 / MK 1) Briefly, here are the steps to remove and replace the battery of the Lexus NX key remote. First, take the remote in hand and start by removing the ph…
How to Replace the Key Battery of the Lexus NX 300
How to Replace the Key Battery of the Lexus NX 300
Lexus NX (2014-2021 / MK 1) Today, we will see in this video tutorial how to disassemble and replace the battery of the electronic key remote for the Lexus NX 300, following the…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos