Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the Lexus NX key remote battery.

Model: Lexus NX MK 2, Az20 - Years 2021-2026
Part: Key

Below we will see the procedure for disassembling and replacing the battery of the key remote for the Lexus NX. First, take our remote control and begin to extract the physical key from inside it; then lever open the shells of the remote control to access the electronic board and the battery, as shown in the video. Now remove the battery and replace it with a new one of the correct type (in this case a CR 2032 3V); insert it in the correct direction and reassemble the remote control.

Posted on 22 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Lexus NX (2021-2026 / MK 2, Az20) Replacing the battery of the key remote for a Lexus NX car is a simple and quick operation that does not require any tools other than the new battery…
Lexus NX (2014-2021 / MK 1) These simple steps will show us how to disassemble and replace the battery of the key fob for the Lexus NX. First, we take our key fob and begin by r…
Lexus NX (2014-2021 / MK 1) Today, we will see in this video tutorial how to disassemble and replace the battery of the electronic key remote for the Lexus NX 300, following the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos