Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Lexus key remote control

Model: Lexus NX Az20, MK 2 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

Replacing the battery of the key remote for a Lexus NX car is a simple and quick operation that does not require any tools other than the new battery of the correct model, which is the CR 2032 3V. Take the remote and press the button on the lower side edge, maintaining pressure to extract the metal key inside.

Once the key is removed, insert the tip into the slot on the upper edge of the remote and lever it outwards to access the battery compartment.

Then remove the old battery and proceed with the replacement.


Posted on 18 February 2025 by ScegliAuto


Related tutorials

Replacement of the Lexus NX key remote battery.
Replacement of the Lexus NX key remote battery.
Lexus NX (2021-2026 / Az20, MK 2) Below we will see the procedure for disassembling and replacing the battery of the key remote for the Lexus NX. First, take our remote control and be…
How to open the remote control and replace the battery of the Lexus NX
How to open the remote control and replace the battery of the Lexus NX
Lexus NX (2021-2026 / Az20, MK 2) The following steps will show us how to open the key remote and replace the battery of the Lexus NX. First, we take our remote and start by removing …
How to replace the battery of the Lexus NX key remote control
How to replace the battery of the Lexus NX key remote control
Lexus NX (2014-2021 / MK 1) These simple steps will show us how to disassemble and replace the battery of the key fob for the Lexus NX. First, we take our key fob and begin by r…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos