Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure light on the Lexus ES

Model: Lexus ES Xv40, - Years 2006-2012
Part:

The following steps will show us how to reset the tire pressure warning light (TPMS) on the Lexus ES; before resetting the TPMS sensors, it is necessary for all four tires to be at the correct pressure. Then, we get into the car and start the engine; after that, we press and hold the TPMS reset button located on the driver's side (next to the OBD port), as shown in the video. We wait for the tire pressure warning light to reset on the instrument panel.

Posted on 5 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Lexus ES (2013-2018 / Xv60) In this tutorial we can see how to reset the tire pressure light in the Lexus ES 350, an extremely simple and quick operation, to be performed only o…
Lexus ES (2019-2025 / Xz10) In this tutorial, you will see how to reset the tyre warning light on a Lexus ES 300h, a very simple and quick operation to perform only after restor…
Lexus ES (2006-2012 / Xv40, ) In order to reset the tire pressure warning light of the Lexus ES350, first you need to inflate the tires, bringing them back to the recommended pres…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos