Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Warning Light on a Lexus ES 300h

Model: Lexus ES Xz10 - Years 2019-2025
Part:

In this tutorial, you will see how to reset the tyre warning light on a Lexus ES 300h, a very simple and quick operation to perform only after restoring the correct tyre pressure as indicated in the manual. First, enter the cabin, then turn on the ignition. Use the indicator buttons on the steering wheel to navigate to the settings menu. Next, enter "Vehicle Settings", then "TPWS", move the selector to "Set Pressure" and perform the reset by holding down the "OK" button.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Lexus ES (2019-2025 / Xz10) In this tutorial we can see how to reset the tire pressure warning light in the Lexus ES 300h, an extremely simple and quick operation, to be carried…
Lexus ES (2019-2025 / Xz10) Resetting the tyre warning light on the Lexus ES 300H is an extremely simple and quick operation. Before proceeding, ensure that the correct pressure…
Lexus ES (2013-2018 / Xv60) In this tutorial we can see how to reset the tire pressure light in the Lexus ES 350, an extremely simple and quick operation, to be performed only o…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos