Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure warning on the Lexus LS

Model: Lexus LS MK 4 - Years 2007-2017
Part:

These short and simple steps will show us how to reset the tire pressure warning on the Lexus LS; before performing the reset, it is necessary that all four tires are at the correct pressure. First, we get into the car and start the instrument panel; then we press and hold the reset button located at the bottom on the driver's side (above the pedals), as shown in the video. This way, we will see that the tire pressure warning will be permanently reset on the instrument panel!

Posted on 27 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Lexus LS (2007-2017 / MK 4) .. Today's procedure will show us how to reset the tire pressure warning on the Lexus LS; before resetting the TPMS sensors, it is necessary.. …
Lexus LS (2007-2017 / MK 4) In order to reset the tire pressure warning light on the Lexus LS, you need to inflate the tires to the recommended pressure value: this value will b…
Lexus LS (2007-2017 / MK 4) In this tutorial, you will see how to reset the tyre warning light on the Lexus LS 430, a very simple and quick operation to perform only after resto…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos