Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lexus
    3. : IS Coupe

How to reset the "Service" light on a Lexus IS?

Model: Lexus IS Coupe Xe30 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

Video tutorial

To reset the "Service" light on a Lexus IS, start by turning on the instrument panel without starting the engine. Locate the button below the panel and use it to access the onboard computer menu.

Once in the menu, navigate to the maintenance or "Service" section, where you will find the option to reset the service reminder. Follow the instructions displayed on the screen, which may require you to press and hold the button for a few seconds to confirm the reset.

After completing these steps, the system will update the maintenance status and the "Service" light will turn off, confirming that the reset has been successful and the vehicle is ready for use without any active maintenance reminders.


Posted on 5 June 2025 by ScegliAuto


Related tutorials

How to reset the "Service" indicator on a Lexus NX?
How to reset the "Service" indicator on a Lexus NX?
Lexus NX (2021-2026 / Az20, MK 2) To reset the "Service" light on a Lexus NX, start by turning on the instrument panel without starting the engine, allowing access to the functions of…
How to reset the Oil Service light on the Lexus NX?
How to reset the Oil Service light on the Lexus NX?
Lexus NX (2014-2021 / MK 1) To reset the Oil Service light on the Lexus NX, turn on the ignition using the controls on the right side of the steering wheel. Use the arrow to scr…
How to Reset the "Service" Light on a Lexus CT 200 H?
How to Reset the "Service" Light on a Lexus CT 200 H?
Lexus CT (2011-2022 / Zwa10) To reset the "Service" light on a Lexus CT 200 H, start by turning on the instrument panel without starting the engine. Using the buttons on the stee…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos