Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Lexus IS 220?

Model: Lexus IS MK 2 - Years 2005-2013
Part: Service warning light

In this tutorial we can see how to reset the service in the Lexus IS 220, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. Let's start by going inside the cabin, then insert the key and turn on the instrument panel. Next, we reach the "Trip A" odometer using the left button on the dashboard, turn off the panel and turn it back on while holding down the same button, releasing it only once the service interval has been correctly reset.

Posted on 19 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Reset Service Light on Lexus Car
Reset Service Light on Lexus Car
Lexus IS (2013-2024 / MK 3) Turn on the instrument cluster without starting the engine (this is not necessary). Press the button located on the right side of your steering wheel…
How to Reset the Tyre Pressure Light on a Lexus IS 300 2.5
How to Reset the Tyre Pressure Light on a Lexus IS 300 2.5
Lexus IS (2013-2024 / MK 3) In this guide, you will learn how to reset the tyre pressure light on the Lexus IS 300 2.5. First, ensure that you have adjusted the tyre pressures t…
How to Reset the Maintenance Light on a Lexus IS
How to Reset the Maintenance Light on a Lexus IS
Lexus IS (2013-2024 / MK 3) This tutorial video shows how to reset the service light on a Lexus IS. The operation does not require complicated steps and is quite brief, but let’…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos