Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the traction control of the Lexus IS

Model: Lexus IS MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

For illustrative purposes, we will see how to disable the traction control of the Lexus IS; it is recommended not to disable traction control, as it could compromise the vehicle's road holding. So, get into the car and start the instrument panel; then press the brake pedal, then press the parking brake twice, as shown in the video.

At this point, repeat the process by pressing the brake pedal twice and then the parking brake pedal twice; the traction control warning will appear on the instrument panel, indicating that it has been disabled.


Posted on 23 October 2025 by ScegliAuto


Related tutorials

How to Activate and Deactivate the Traction Control on a Lexus IS
How to Activate and Deactivate the Traction Control on a Lexus IS
Lexus IS (2005-2013 / MK 2) These brief and simple instructions will show you how to activate and deactivate the traction control on a Lexus IS. It is advised not to disable the…
How to deactivate the traction control in the Lexus IS 350?
How to deactivate the traction control in the Lexus IS 350?
Lexus IS (2013-2024 / MK 3) This tutorial shows how to deactivate the traction control in the Lexus IS 350, a very simple and quick operation to perform only when necessary and …
Checking Tyre Pressure
Checking Tyre Pressure
Lexus IS (2005-2013 / MK 2) Checking the inflation pressure of the tyres is an aspect not to be overlooked, as it affects many factors such as grip, fuel consumption, and the li…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos