Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate and Deactivate the Traction Control on a Lexus IS

Model: Lexus IS MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

These brief and simple instructions will show you how to activate and deactivate the traction control on a Lexus IS. It is advised not to disable the traction control to ensure safety while driving. First, get into the vehicle and start the engine.

Then, locate the traction control activation/deactivation button, situated below the ignition button, as shown in the video. Normally, the traction control is activated upon the first engine start; when it is deactivated, a warning will appear on the instrument cluster!


Updated on 25 October 2026 by ScegliAuto


Related tutorials

How to deactivate the traction control of the Lexus IS
How to deactivate the traction control of the Lexus IS
Lexus IS (2005-2013 / MK 2) For illustrative purposes, we will see how to disable the traction control of the Lexus IS; it is recommended not to disable traction control, as it …
How to deactivate the traction control in the Lexus IS 350?
How to deactivate the traction control in the Lexus IS 350?
Lexus IS (2013-2024 / MK 3) This tutorial shows how to deactivate the traction control in the Lexus IS 350, a very simple and quick operation to perform only when necessary and …
How to deactivate the audible seat belt alarm on Lexus and Toyota vehicles
How to deactivate the audible seat belt alarm on Lexus and Toyota vehicles
Lexus IS (2013-2024 / MK 3) In this video we can see how to deactivate the alarm beep, which warns us that we have not fastened the seat belts, both on Lexus and Toyota vehicles…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos