Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the factory radio of the Lexus LS

Model: Lexus LS MK 4 - Years 2007-2017
Part: Car stereo

The main steps outlined in this guide will show us how to disassemble and replace the factory radio of the Lexus LS. First, we get into the car and start by removing the plastic side covers located at the bottom of the dashboard; we remove the gear shift knob and the central tunnel panel, as shown in the video. At this point, we remove the air conditioning controls and then the radio, unscrewing the fixing screws and disconnecting all the electrical connectors on the back, as shown in the video. We replace the radio with the new one, reassembling all the dashboard components!

Posted on 26 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Lexus LS
How to reset the tire pressure warning light on the Lexus LS
Lexus LS (2007-2017 / MK 4) Today's procedure will show us how to reset the tire pressure warning on the Lexus LS; before resetting the TPMS sensors, it is necessary for all fou…
How to reset the tire pressure warning on the Lexus LS
How to reset the tire pressure warning on the Lexus LS
Lexus LS (2007-2017 / MK 4) These short and simple steps will show us how to reset the tire pressure warning on the Lexus LS; before performing the reset, it is necessary that a…
How do you reset the tire pressure light on the Lexus LS?
How do you reset the tire pressure light on the Lexus LS?
Lexus LS (2007-2017 / MK 4) In order to reset the tire pressure warning light on the Lexus LS, you need to inflate the tires to the recommended pressure value: this value will b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos