Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Daytime Running Lights

Model: Lexus CT MK 1 - Years 2011-2021
Part: Accessory kit

European regulations require headlights to be on even during the day. To avoid frequent replacement of expensive bulbs and reduce fuel consumption, it is possible to install an LED kit which has a long lifespan and low consumption. Once you have obtained the headlight kit, you can proceed with the installation. The LEDs must be installed at a height between 25 cm and 150 cm from the ground and the distance between the two lights must be at least 60 cm. Once the correct position is found, proceed to install the plastic supports where the LEDs will be fixed. These LEDs require a control unit that must be mounted inside the engine bay in a suitable position. Once the cables from the lights to the control unit are connected, connect the black wire to the negative terminal of the battery and the red wire to the positive terminal. At this point, it is necessary to run a wire into the cabin to connect a switch for turning the LEDs on and off. Remember to turn them off when parking the vehicle.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of HID Bulb Accessory Kit
Installation of HID Bulb Accessory Kit
Lexus CT (2011-2022 / Zwa10) Improving night visibility is always advisable, so obtain the necessary modification kit and proceed as follows. Dismantle the headlamp unit and then…
Replacement of Interior Light Bulb
Lexus CT (2011-2022 / Zwa10) To replace the bulbs in the interior light, first remove the cover glass of the light: use a small flathead screwdriver to gently pry along the edges…
How to reset the tire pressure light in the Lexus CT 200?
How to reset the tire pressure light in the Lexus CT 200?
Lexus CT (2011-2022 / Zwa10) Resetting the tire pressure light in the Lexus CT 200, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos