Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Lexus NX 300

Model: Lexus NX MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

Start by pressing and holding the side button of the key fob on your Lexus NX 300, then extract the physical emergency key. Next, using the emergency key as a lever, unclip and remove the back of the key fob. Once done, unclip and remove the key's circuit board, and you will have access to the key battery, which you need to extract.

When you have completed this step, the disassembly will be finished.

To install the new battery, repeat this procedure in reverse, and the replacement will be complete.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Replacing the Key Battery of the Lexus Nx 300
Replacing the Key Battery of the Lexus Nx 300
Lexus NX (2014-2021 / MK 1) To replace the key battery of the Lexus Nx 300 model, proceed as follows: take a sharp object or use your nail to pry open the seam of the key shell.…
How to Replace the Key Battery of a Lexus NX 300
How to Replace the Key Battery of a Lexus NX 300
Lexus NX (2014-2021 / MK 1) Start by pressing and holding the button on the side of the electric key of your Lexus NX 300, then extract the physical key inside. After doing this…
How to Replace the Key Battery of the Lexus NX 300
How to Replace the Key Battery of the Lexus NX 300
Lexus NX (2014-2021 / MK 1) Today, we will see in this video tutorial how to disassemble and replace the battery of the electronic key remote for the Lexus NX 300, following the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos