Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Repair of Car Radio

Model: Lexus IS MK 1 - Years 1998-2005
Part: Car stereo

This video shows how to remove the car radio from our vehicle. If the radio shows errors or malfunctions, try disconnecting the car battery for a few minutes to reset the errors; if the errors persist, it will need to be removed. To proceed with the removal, use the appropriate tool to lever the lower part of the radio and, once extracted, unscrew the screws underneath. Then unscrew the screws located above the ventilation fans and extract the entire unit; when you reach the upper screws of the radio, unscrew them and remove the radio, taking care with the various connections present.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Lexus IS (2005-2013 / MK 2) To remove the original car radio, first move the gear lever all the way back to facilitate the extraction process. Start by removing the aluminium tr…
Installation of Radio Connection Kit with iPhone
Installation of Radio Connection Kit with iPhone
Lexus IS (2005-2013 / MK 2) Refer to the images to understand how to install the module that connects the iPhone to the car radio. If you have an automatic gearbox, first unscre…
How to remove the stock radio from a Lexus IS
How to remove the stock radio from a Lexus IS
Lexus IS (2013-2024 / MK 3) Below we will see the instructions that will allow us to disassemble and replace the factory radio of the Lexus IS. First, we get into the car and st…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos