Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the stock radio from a Lexus IS

Model: Lexus IS MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the factory radio of the Lexus IS. First, we get into the car and start removing the two plastic covers found on the side; we remove the central tunnel component and the cup holders (disconnecting the electrical connector underneath), as shown in the video.

At this point, we unscrew the radio screws, located on the sides, disconnecting the electrical wiring on the back; replace if necessary the radio with the new one, reassembling all the other components.


Posted on 22 June 2025 by ScegliAuto


Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Lexus IS (2005-2013 / MK 2) To remove the original car radio, first move the gear lever all the way back to facilitate the extraction process. Start by removing the aluminium tr…
How to Replace the Front Bumper Grille of the Lexus IS
How to Replace the Front Bumper Grille of the Lexus IS
Lexus IS (2005-2013 / MK 2) In a few simple steps, you will see how to dismantle and replace the front bumper grille of the Lexus IS. First, open the bonnet of the vehicle and s…
How to replace the radio in a Lexus IS?
How to replace the radio in a Lexus IS?
Lexus IS (2005-2013 / MK 2) To replace the radio in a Lexus IS, use a tool to pry off the protective panel at the base of the centre console; underneath, you will find screws th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos