Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you install the side moldings in the Lexus Nx300?

Model: Lexus NX MK 1 - Years 2014-2021
Part: Accessory kit

For the installation of the side moldings on the Lexus Nx300 we need three things: alcohol or other suitable cleaner, a clean cloth and some type of masking tape. We start the procedure by cleaning thoroughly, using the alcohol and the cloth, the side bodywork in the place where we are going to install the moldings and in all the areas around it. We then take the moldings and remove the adhesive protection for about one centimetre. We place the molding in the place where we want to install it and stop it with tape. Let's make sure that the position is correct and then remove all the sticker protection and also the masking tape. Finally, we press hard on the molding to make it adhere properly.

Posted on 25 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you check the tire pressure on the Lexus NX300?
How do you check the tire pressure on the Lexus NX300?
Lexus NX (2014-2021 / MK 1) In this video we see how to check the tire pressure on the Lexus NX300: we will use the directional buttons located on the right side of the steering…
How to reset the tire pressure light on the Lexus NX300?
How to reset the tire pressure light on the Lexus NX300?
Lexus NX (2014-2021 / MK 1) In this tutorial we can see how to reset the tire pressure light in the Lexus NX300, an extremely simple and quick operation. Before proceeding, we m…
How to replace the 12Volt battery in the Lexus NX300
How to replace the 12Volt battery in the Lexus NX300
Lexus NX (2021-2026 / Az20, MK 2) We can see in this video how to change the 12-volt battery of the Lexus NX300: first of all, we need to know that the battery is not located in the f…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos