Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Lights on the Lexus HS

Model: Lexus HS Anf10 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fog lights

Video tutorial

If you need to replace the front fog lights on this vehicle, you can follow the instructions provided in this video and the description below. First, lift the vehicle and get a socket wrench to remove the screws securing the fog light from the back.

Once the screws are removed, the fog light can be pulled out after disconnecting the electrical connector. Take the new fog light, position it in its housing, then reattach the screws and reconnect the electrical connector, and the job will be complete.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Disassemble the Front Door Panel on the Lexus HS
How to Disassemble the Front Door Panel on the Lexus HS
Lexus HS (2009-2017 / Anf10) This brief guide will illustrate how to disassemble and replace the front door panel on the Lexus HS in simple and quick steps. First, open the front…
How to Remove the Factory Radio from the Lexus HS
How to Remove the Factory Radio from the Lexus HS
Lexus HS (2009-2017 / Anf10) In this guide, follow the steps to remove and replace the factory radio in the Lexus HS. First, get inside the vehicle and start removing the trim pi…
How to Replace the Key Fob Battery on a Lexus HS
How to Replace the Key Fob Battery on a Lexus HS
Lexus HS (2009-2017 / Anf10) To replace the battery in the Lexus HS key fob, you only need a common tool: a flathead screwdriver that most people have at home or a similar tool. …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos