Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disassemble the Front Door Panel on the Lexus HS

Model: Lexus HS Anf10 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

Video tutorial

This brief guide will illustrate how to disassemble and replace the front door panel on the Lexus HS in simple and quick steps. First, open the front door and start prying on the window switch panel to remove it, disconnecting the electrical connectors found on the back; then unscrew the screws located underneath and on the opening handle, as shown in the video.

At this point, pry on the sides of the panel to detach and remove it, disconnecting the handle cable; finally, reassemble the door panel by applying the reverse procedure!


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb in the Lexus Hs
How to Replace the Headlight Bulb in the Lexus Hs
Lexus HS (2009-2017 / Anf10) In this video tutorial, we will see how to replace the headlight bulb in the Lexus Hs in simple and quick steps. First, open the hood of your car and…
How to Reset the Engine Oil Light on a Lexus HS
How to Reset the Engine Oil Light on a Lexus HS
Lexus HS (2009-2017 / Anf10) Follow the instructions below to reset the engine oil light (service) on a Lexus HS. First, get inside the vehicle and turn on the ignition, making s…
How to Remove the Factory Radio from the Lexus HS
How to Remove the Factory Radio from the Lexus HS
Lexus HS (2009-2017 / Anf10) In this guide, follow the steps to remove and replace the factory radio in the Lexus HS. First, get inside the vehicle and start removing the trim pi…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos