Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Brake Pads

Model: Lexus IS MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake pads

See other generations:
Video tutorial

Replacing the brake pads is one of the easiest maintenance tasks you can perform yourself: lift the vehicle on a jack or hydraulic lift if possible; then remove the front wheel and the fixing pins of the brake caliper; take off the brake caliper, disconnect the wear sensor plug and remove the old pads; attach the sensor to the new pads, position them in the support, connect the sensor plug, retract the caliper piston using a suitable tool or a pair of pliers and secure it to the support; pay attention during the first braking.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacing Front Brake Pads
Lexus IS (2005-2013 / MK 2) Lift the vehicle and secure it on appropriate axle stands, then remove the front wheel to access the brake caliper. Unscrew the caliper mounting bolt…
Replacing Rear Discs and Pads
Replacing Rear Discs and Pads
Lexus IS (2005-2013 / MK 2) To replace the rear discs and pads, lift the vehicle and remove the rear wheel. Disconnect the first spring, the outer one, located just behind the p…
Replacing Front Brake Discs and Pads
Replacing Front Brake Discs and Pads
Lexus IS (2005-2013 / MK 2) It is good practice to replace the pads when you decide to replace the brake discs. To replace the discs, lift the vehicle, remove the front wheel, a…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos