Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Pads

Model: Lexus IS MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake pads

See other generations:
This video is currently unavailable

Lift the vehicle and secure it on appropriate axle stands, then remove the front wheel to access the brake caliper. Unscrew the caliper mounting bolts and slide it off its bracket.

Remove the old brake pads, retract the caliper piston using a C-clamp, and clean the pad seat and caliper with brake cleaner. Apply copper grease to the backing plates of the pads and the rear of the pads to prevent vibrations and squeaking.

Insert the new pads and reposition the caliper, tightening the mounting bolts. Pump the brake pedal and pay attention during the initial braking.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Brake Pads
Replacement of Front Brake Pads
Lexus IS (2005-2013 / MK 2) Replacing the brake pads is one of the easiest maintenance tasks you can perform yourself: lift the vehicle on a jack or hydraulic lift if possible; …
Replacing Front Brake Discs and Pads
Replacing Front Brake Discs and Pads
Lexus IS (2005-2013 / MK 2) It is good practice to replace the pads when you decide to replace the brake discs. To replace the discs, lift the vehicle, remove the front wheel, a…
Replacing Rear Discs and Pads
Replacing Rear Discs and Pads
Lexus IS (2005-2013 / MK 2) To replace the rear discs and pads, lift the vehicle and remove the rear wheel. Disconnect the first spring, the outer one, located just behind the p…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos