Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Discs and Pads

Model: Lexus IS MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake rotors

See other generations:
Video tutorial

It is good practice to replace the pads when you decide to replace the brake discs. To replace the discs, lift the vehicle, remove the front wheel, and then detach the caliper along with its bracket without removing the pads (previously replaced), by unscrewing the mounting bolts from the hub. Next, remove the old disc, clean the disc seat on the hub with a wire brush, and apply grease before installing the new disc after cleaning it of protective oil. Finally, refit the bracket with the caliper and the wheel.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Replacing Rear Discs and Pads
Replacing Rear Discs and Pads
Lexus IS (2005-2013 / MK 2) To replace the rear discs and pads, lift the vehicle and remove the rear wheel. Disconnect the first spring, the outer one, located just behind the p…
Replacement of Front Discs and Pads
Lexus IS (2013-2024 / MK 3) Lift the vehicle on suitable axle stands and remove the front wheel; proceed to remove the brake caliper, extract the old pads and also remove the ca…
Checking Brake Pad Squeal
Lexus IS (2013-2024 / MK 3) If you hear a squeal from the brake calipers during braking, especially at low speeds, inspect the braking system to determine whether to replace the…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos