Do it yourself
Frequently asked questions about cars and motorcycles

Installation of LED Interior Lights

Model: Lexus IS MK 2 - Years 2005-2013
Part: Light bulb

Replacing the interior lights with LED types will give the vehicle a much more modern and appealing look, as well as improve visibility inside the cabin. Start with the front dome light by unclipping it along the edges to access the bulb holder. Move on to the rear light and then complete with the vanity lights under the sun visor. Continue with the courtesy lights under the door panel and the courtesy light above the threshold. Finally, replace the bulb located under the external rear-view mirror by unclipping the mirror and the outer cover.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Lexus IS (2005-2013 / MK 2) Installing an LED strip in the boot will certainly improve visibility. Essentially, you need to identify where to attach the strip and power it. The …
Lexus IS (2005-2013 / MK 2) The cabin lights turn on when a door is opened and turn off when it is closed; if the lights do not turn on when the door is opened, perform the foll…
Lexus IS (2005-2013 / MK 2) If you decide to install an aftermarket audio system that requires an amplifier, it is essential to power the amplifier directly from the battery usi…

How to Remove the Interior Light of a Mini

Remove the interior light of a Mini: use a screwdriver or plastic lever to pry between the cover and the light itself (avoid damaging the headlining), pull the cover out from the panel and disconnect the power connector after removing it. Replace the damaged bulb with a new one (same size and voltage). Refit the light into its housing (push it in with your hands until the metal clips are fully locked). Test the light's functionality before completely refitting the piece.

Watch the video!


by ScegliAuto

More videos