Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lincoln
    3. :
  3. Mks
    4. : How to perform a service reset on Lincoln Mks

Lincoln Mks - Video tutorial

Model: Lincoln Mks MK 1 - Years 2009-2016
Part: -board computer
Operation: How to perform a service reset on Lincoln Mks

In this video tutorial we can see how to turn off the service light on Lincoln MKs. The first thing to do will be to change the engine oil and filters. After performing the do-it-yourself service, get in the car, put the handbrake, insert the ignition key and turn on the instrument panel, without starting the engine; on the display we see the message "Oil change required", then press the Ok button on the steering wheel on the left to access the user settings MENU; now press the down arrow key to scroll through the MENU and select the "Settings" item and press the right arrow key; now select "Vheicle settings", then press the arrow key to the right, select Vheicle and key to the right, once again to get to the item "Oil life reset", press the key to the right and select "Set to 100" press OK to confirm. Reset performed.


Posted on 24 May 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos