Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Rearview Mirror on the Lincoln MKS

Model: Lincoln Mks MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

Video tutorial

This guide shows how to replace the exterior rearview mirror on the Lincoln MKS. The first step is to remove the trim panel and support for the mirror control and disconnect the cable. Using a 10 mm wrench, remove the three mounting bolts for the mirror, holding the outer body to avoid damaging the paint.

At this point, clean the area before installing the new mirror. Reassemble everything in position and check the proper operation of the electric mechanism.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Lincoln MKS?
How to Replace the Air Filter on a Lincoln MKS?
Lincoln Mks (2009-2016 / MK 1) To replace the air filter on a Lincoln MKS, open the hood to access the components inside the engine compartment. The box containing the filter is lo…
How to Replace the Front Headlight Bulb on a Lincoln MKS?
How to Replace the Front Headlight Bulb on a Lincoln MKS?
Lincoln Mks (2009-2016 / MK 1) To replace the front headlight bulb on a Lincoln MKS, open the hood to access the components inside the engine bay. Remove the circular cover on the …
How to Replace the Key Fob Battery in a Lincoln MKS?
How to Replace the Key Fob Battery in a Lincoln MKS?
Lincoln Mks (2009-2016 / MK 1) Replacing the key fob battery in a Lincoln MKS, as shown in this tutorial, is a very simple and quick task. First, gather a small flathead screwdrive…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos