Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lincoln
    3. :
  3. Mkt
    4. : How do you replace the Lincoln MKT rear shock absorber?

Lincoln Mkt - Video tutorial

Model: Lincoln Mkt MK 1 - Years 2010-2019
Part: Shock absorbers
Operation: How do you replace the Lincoln MKT rear shock absorber?

In order to replace the Lincoln MKT rear shock absorber, the car must be raised so that the corresponding wheel is not in contact with the floor: once the car has been raised, the tailgate must be opened and the carpet moved. from the side at the shock absorber to be removed. Here you will find a bolt that secures the shock absorber in its upper part; also unscrewing the screw in correspondence with its lower part, ie on the axle shaft, it will be possible to completely remove the old shock absorber and insert the new spare part.


Posted on 27 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos