Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Third Brake Light Glass on a Lincoln MKX

Model: Lincoln Mkx MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

To replace the third brake light on our Lincoln MKX (or Ford Edge), you will need a plastic pry tool and a screwdriver. Start by removing the two screws on the sides of the light assembly.

It won't come off just by removing the screws, so you need to use the pry tool to gently and firmly pull it off. Once it is off, you will see that there are plastic clips holding the light assembly in place, and one connector for the electrical part on the right and one on the left.

Remove both.

With the new piece, connect the left connector first and then the right, snap the glass back into its supports, and reattach the two screws in their place. The job is done.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

Replacing a Brake Light on a Lincoln MKX
Replacing a Brake Light on a Lincoln MKX
Lincoln Mkx (2007-2015 / MK 1) How to replace the brake light bulb in the rear headlamp of a Lincoln MKX by yourself. The replacement bulb costs $7.50 on major e-commerce platforms…
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in a Lincoln MKX, open the hood to access the components in the engine compartment. On the right side, you will find the batte…
How to Replace the Headlight Bulb on a Lincoln MKX?
How to Replace the Headlight Bulb on a Lincoln MKX?
Lincoln Mkx (2007-2015 / MK 1) To replace the headlight bulb on a Lincoln MKX, open the hood to access the back of the corresponding headlight. Disconnect the connector located at …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos