Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wipers on the Lincoln MKC

Model: Lincoln Mkc MK 1 - Years 2015-2019
Part: Windshield wipers

In today's tutorial, you will see step-by-step instructions to remove and replace the front wipers on the Lincoln MKC in simple steps. First, move to the front of your car and start by lifting the wiper arm; then, unclip the plastic clip found on it, rotating the wiper to remove it from the arm, as shown in the video. Now, install the new blade, which should be the same size as the original; securely attach the clip and repeat the same process to replace the other wiper!

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield Wipers on a Lincoln MKC?
How to Replace the Windshield Wipers on a Lincoln MKC?
Lincoln Mkc (2015-2019 / MK 1) To replace the windshield wipers on a Lincoln MKC, lift the arm to which the wiper is attached, positioning both pieces vertically. Then, push down o…
How to Replace the Front Brake Pads on a Lincoln MKC?
How to Replace the Front Brake Pads on a Lincoln MKC?
Lincoln Mkc (2015-2019 / MK 1) To replace the front brake pads on a Lincoln MKC, lift the vehicle so that the front wheel corresponding to the pads being replaced is off the ground…
How to Replace the Front Brake Pads on a Lincoln MKC
How to Replace the Front Brake Pads on a Lincoln MKC
Lincoln Mkc (2015-2019 / MK 1) In this brief and simple guide, follow the main steps to remove and replace the front brake pads on a Lincoln MKC. First, lift the vehicle and remove…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos