Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ashtray in the Lincoln MKX?

Model: Lincoln Mkx MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the ashtray in the Lincoln MKX, use a tool to pry off the cover of the center console. Once this is removed from its housing, you can locate the screws that secure the ashtray to its housing.

By loosening these screws, you can pull out the ashtray and disconnect the connectors at the back. After removing the old ashtray, insert the new one into its place, connect it, and secure it with the appropriate screws, finally covering everything with the center console cover.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in a Lincoln MKX, open the hood to access the components in the engine compartment. On the right side, you will find the batte…
How to Replace the Headlight Bulb on a Lincoln MKX?
How to Replace the Headlight Bulb on a Lincoln MKX?
Lincoln Mkx (2007-2015 / MK 1) To replace the headlight bulb on a Lincoln MKX, open the hood to access the back of the corresponding headlight. Disconnect the connector located at …
How to Replace the Battery in a Lincoln MKX?
How to Replace the Battery in a Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in the Lincoln MKX, open the hood to access the components inside the engine compartment. The battery is located immediately u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos