Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Scorpio Goa Getaway
    4. : -board computer

Mahindra Scorpio Goa Getaway - -board computer

Mahindra Scorpio Goa Getaway (2014-2023 / MK 3)
How to reset the Mahindra Scorpio service light
In this new mini guide on the Mahindra Discoverrio we will find out how to properly reset the service light. Thanks to the following indications you will be …read all…
Posted on 9 May 2024 by ScegliAuto
Mahindra Scorpio Goa Getaway (2014-2023 / MK 3)
How to reset the Mahindra Scorpio ODO light
If you want to reset the "ODO" light on your Mahindra Scorpio but you don't know how to do it, don't worry because in the following mini guide you will find …read all…
Posted on 7 May 2024 by ScegliAuto
Mahindra Scorpio Goa Getaway (2014-2023 / MK 3)
To reset the service light of the Mahindra Scorpio.
If you don't know how to manually reset the maintenance light that appears on your Mahindra Scorpio, all you have to do is carefully read the following mini …read all…
Posted on 8 November 2023 by ScegliAuto
Battery (2) Arm (1) Key (2) -board computer (3) Checks and maintenance (2) Air filter (2) Cabin air filter (3) Accessory Kit (1) Engine oil (1) Door panel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos