Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change on a Phantom F12 125

Model: Malaguti Phantom F12 125
Part: Engine oil

Video tutorial

Start the engine for a few minutes to warm the circulating oil, making it less viscous. Unscrew the bolt that acts as a plug for the drain hole located under the sump, and collect the used oil in a container.

If it's also time to replace the oil filter, use a strap wrench to unscrew and remove it, and remember to lubricate the new filter before fitting. Measure the amount of drained oil and refill the same amount through the filler hole.

Another trick to aid the oil flow is to unscrew the filler cap immediately to allow air to pass through the system.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on Malaguti Phantom F12 125
How to Change the Engine Oil on Malaguti Phantom F12 125
Phantom F12 125 You can replace the engine oil on the Malaguti Phantom F12 125 by loosening the drain plug located at the central lower part of the scooter: once thi…
How to Replace the Grips on a Malaguti Phantom F12 125?
Phantom F12 125 To replace the grips on a Malaguti Phantom F12 125, lift the grip to insert some penetrating oil inside. This will reduce friction between the inner …
How to Dismantle the Engine of a Malaguti Phantom F12 125?
How to Dismantle the Engine of a Malaguti Phantom F12 125?
Phantom F12 125 The process of dismantling the engine of the Malaguti Phantom F12 125 can be done by completely removing the engine block from its housing, unscrewin…

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos