Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Malaguti
  4. :
  5. Xsm 125
  6. : How do you replace the Malaguti XSM 125 muffler?

Model: Malaguti Xsm 125
Part: Muffler
How do you replace the Malaguti XSM 125 muffler?

To be able to replace the Malaguti XSM 125 muffler, first of all you need to unscrew the bolts that secure the rear side panel, which is located precisely to protect the muffler itself. Once the bolts have been loosened and the fairing removed, it will be possible to loosen the screw that fixes the muffler in its upper part and unscrew the bolt that fixes the fixing ring in the part connected to the exhaust duct. When the muffler has been released, it will be possible to remove it and replace it with a new spare part, fixing it to the screws and covering it with the side panel.


Posted on 13 August 2022 by ScegliAuto

This video is currently unavailable

How to change the motor oil of a Harley Davidson Shovelhead?

To change the oil of a Harley Davidson Shovelhead, start by warming up the engine for a few minutes to make the oil more fluid and facilitate drainage. Park the motorcycle on a flat and stable surface and turn off the engine. Place a container for collecting the oil under the drain plug of the crankcase. Use a wrench to loosen the drain plug and let the old oil drain completely. Once the oil has drained, clean the drain plug and washer, then put the plug back in place and tighten it carefully. Remove the oil tank cap and use a funnel to slowly pour the new oil into the tank, making sure to use the type and quantity specified in the owner's manual. After adding the oil, replace the oil tank cap and start the engine for a few minutes to circulate the new oil. Turn off the engine and check the oil level, adding more if necessary. Check for any leaks around the drain plug before resuming riding.

Watch the video!


by ScegliAuto

More videos