Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fork Seal on a Malaguti XSM 125?

Model: Malaguti Xsm 125
Part:

Video tutorial

To replace the fork seal on a Malaguti XSM 125, loosen the bolts that secure the fork to its housing: these screws will be located at the top of the fork, just below the handlebars, and at the bottom near the wheel. Once all the bolts are loosened, you can free the wheel from its housing, allowing the fork to be detached as well: the seal at the top can be removed using a tool, so it can be replaced with a new one.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

Xsm 125 The procedure for replacing the muffler on the Malaguti XSM 125 is done by loosening the screws that fix the exhaust terminal to its housing: these s…
Xsm 125 To replace the exhaust on the Malaguti XSM 125, loosen the screws that secure the old exhaust terminal to its housing by loosening the bolts that hol…
Xsm 125 Today, you will learn how to remove and replace the battery of the Malaguti XSM 125 motorcycle, as well as the XTM 125. First, remove the rider's sea…

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos