Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Ertiga
    4. : -board computer

Maruti Ertiga - -board computer

Maruti Ertiga (2012-2018 / MK 1)
How do you set the clock on a Suzuki/Maruti Ertiga?
In this video we see how to set the clock on a Suzuki or Maruti Ertiga (it is the same model produced by two affiliated brands) on the instrument panel we find …read all…
Posted on 14 April 2024 by ScegliAuto
Maruti Ertiga (2012-2018 / MK 1)
How to set the time on a Maruti Ertiga vehicle?
Setting the clock on a Maruti Ertiga vehicle is a very simple operation, achievable in a few minutes. The first thing to do is to get inside the car and turn …read all…
Posted on 17 November 2023 by ScegliAuto
Maruti Ertiga (2018-2024 / MK 2)
How to set the time of the Suzuki Ertiga 2018
If on the system of your Maruti Ertiga you see a different time from the exact one and you want to change it manually, all you have to do is put these short …read all…
Posted on 14 June 2022 by ScegliAuto
Airbags (1) Shock absorbers (1) Battery (1) Spark plugs (1) Key (4) -board computer (3) Checks and maintenance (2) Tail light (1) Air filter (4) Cabin air filter (2) Accessory Kit (1) Interior lights ceiling light bulb (2) Engine oil (2) Door panel (1) Brake pads (1) Instrument cluster (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos