Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Xl6
    4. : How to manually set the time of the Maruti XL 6

Maruti Xl6 - Video tutorial

Model: Maruti Xl6 MK 1 - Years 2019-2024
Part: -board computer
Operation: How to manually set the time of the Maruti XL 6

If you want to manually change the time shown on the display of your new Maruti XL 6, all you have to do is read the following mini guide carefully and put into practice what is described. First, go inside the car and press the "Start / Stop" button twice in succession to start the instrument panel. Immediately afterwards, hold down the two buttons located inside the dashboard for a few seconds and access the secret menu. At this point scroll down and select the "Clock setting" option and then "Adjust Clock". Finally, turn the button under the speedometer clockwise and anti-clockwise to change the hour and minute digits. Exit the menu to save your changes and you are done.


Posted on 29 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos