Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of the Maruti Ciaz

Model: Maruti Ciaz MK 1 - Years 2014-2024
Part: Key

In this tutorial, you will see how to replace the battery of the Maruti Ciaz key fob, a very simple and quick operation. For this, you will need a small flathead screwdriver and a replacement CR2032 battery. First, press the button on the back to extract the emergency key, then locate the indicated slot, insert the screwdriver, and pry apart the two halves. At this point, remove the old battery and insert the new one, making sure to position it correctly.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Key Battery on a Maruti Ciaz?
How to Replace the Remote Key Battery on a Maruti Ciaz?
Maruti Ciaz (2014-2024 / MK 1) On the back of the remote, find a lever: push it to unlock and remove the mechanical key blade. Once done, locate the slot shown in the video and use…
How to Program a Remote for Door Locking/Unlocking on the Maruti Ciaz [WORLD]
How to Program a Remote for Door Locking/Unlocking on the Maruti Ciaz [WORLD]
Maruti Ciaz (2014-2024 / MK 1) On all Maruti and Suzuki vehicles, you can program a remote for locking and unlocking the doors as follows: Enter the vehicle and sit in the driver's…
How to Replace the Rear Light of the Maruti Ciaz
How to Replace the Rear Light of the Maruti Ciaz
Maruti Ciaz (2014-2024 / MK 1) This guide provides instructions on how to remove and replace the rear light of the Maruti Ciaz by following these simple steps. First, move to the b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos