Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a Remote for Door Locking/Unlocking on the Maruti Ciaz [WORLD]

Model: Maruti Ciaz MK 1 - Years 2014-2024
Part: Key

On all Maruti and Suzuki vehicles, you can program a remote for locking and unlocking the doors as follows: Enter the vehicle and sit in the driver's seat. Close all doors and insert the ignition key. Turn the ignition on and off in sequence, then open and close the driver's door three consecutive times. Finally, turn the ignition on and off again in sequence. At this point, the remote will be programmed for locking and unlocking. Exit the vehicle and test the remote.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery of the Maruti Ciaz
How to Replace the Key Fob Battery of the Maruti Ciaz
Maruti Ciaz (2014-2024 / MK 1) In this tutorial, you will see how to replace the battery of the Maruti Ciaz key fob, a very simple and quick operation. For this, you will need a sm…
How to Reset the Tire Pressure Light on the Maruti Ciaz?
How to Reset the Tire Pressure Light on the Maruti Ciaz?
Maruti Ciaz (2014-2024 / MK 1) You can reset the tire pressure light on the Maruti Ciaz by inflating the tires to the optimal pressure value: this value will be indicated in the ow…
How to Replace the Remote Key Battery on a Maruti Ciaz?
How to Replace the Remote Key Battery on a Maruti Ciaz?
Maruti Ciaz (2014-2024 / MK 1) On the back of the remote, find a lever: push it to unlock and remove the mechanical key blade. Once done, locate the slot shown in the video and use…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos