Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in the Maruti SX4

Model: Maruti Sx4 MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

Video tutorial

In today's video, you will see how to replace the original radio in the Maruti SX4. Specifically, you will learn how to install a new double DIN touch screen unit. First, remove the plastic trim surrounding the radio.

Then, take out the mounting screws to detach the radio from the frame. Pull it out now. Disconnect the power connector and the antenna.

Now proceed to install the new unit, using the same electrical connections and the position of the old radio. Once done, you can enjoy your new multimedia system.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Replace the Heater Core on a Maruti SX4?
How to Replace the Heater Core on a Maruti SX4?
Maruti Sx4 (2007-2014 / MK 1) To replace the heater core on a Maruti SX4, loosen all the plastics that make up the dashboard: start by unscrewing the screws at the back of the ste…
Replacing the Air Filter of the Maruti SX4
Replacing the Air Filter of the Maruti SX4
Maruti Sx4 (2007-2014 / MK 1) Today, we will see in this video tutorial how to remove and replace the engine air filter of the Maruti SX4. First, open the hood of your car and sta…
Replacing the Fuel Filter on a Maruti Sx4
Replacing the Fuel Filter on a Maruti Sx4
Maruti Sx4 (2007-2014 / MK 1) In today's tutorial video, you will learn how to remove and replace the fuel filter on a Maruti Sx4, following the instructions below. First, open th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos