Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Fog Lights on the Maruti Swift

Model: Suzuki Maruti Swift Rs413, Rs415, Rs413d - Years 2005-2021
Part: Fog lights

If you want to replace the fog light bulbs, you can find instructions in the description of the video below. First, open the bonnet to locate the bulb that needs replacing. Then, remove the plastic cover behind the light to disconnect the electrical connector. Next, remove the bulb by unfastening the steel clip. Take the new bulb and position it without touching the glass with your fingers. Reattach the steel clip, reconnect the connector, and finally, replace the cover.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter in a Maruti Swift?
How to Replace the Cabin Filter in a Maruti Swift?
Suzuki Maruti Swift (2005-2021 / Rs413, Rs415, Rs413d) In this tutorial, you will learn how to replace the cabin air filter in a Maruti Swift, a very simple and cost-effective operation. First, sit in the…
Where is the fuse box of the Maruti Swift located?
Where is the fuse box of the Maruti Swift located?
Suzuki Maruti Swift (2005-2021 / Rs413, Rs415, Rs413d) If you want to be able to identify the box containing all the various fuses of your Maruti Swift, all you have to do is read the following guide and …
How to reset the service indicator light on the Maruti Swift
How to reset the service indicator light on the Maruti Swift
Suzuki Maruti Swift (2005-2021 / Rs413, Rs415, Rs413d) These short and simple instructions will show us how to reset the maintenance service light for the oil change in the Maruti Swift, as well as the Su…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos