Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio on a Maruti Baleno?

Model: Maruti Baleno MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Car stereo

See other generations:
Video tutorial

To replace the radio on a Maruti Baleno, pry off the panel with the hazard light button located just below the radio. Once this panel is removed, unscrew the screws that secure the radio to its housing.

This will allow you to disconnect the connectors at the back of the device, so you can insert the new part. Secure it to its housing with the screws removed earlier, and snap the panel with the hazard light button back into place.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on a Maruti Baleno?
How to Replace the Fuel Filter on a Maruti Baleno?
Maruti Baleno (2015-2023 / MK 2) To replace the fuel filter on a Maruti Baleno, lift the vehicle to access the components underneath. The fuel filter is located near the left rear wh…
How to Replace the Battery in a Maruti Baleno?
How to Replace the Battery in a Maruti Baleno?
Maruti Baleno (2015-2023 / MK 2) To replace the battery in a Maruti Baleno, open the hood of the car to access the components inside the engine compartment. On the right side of the …
How to Replace the Air Filter on a Maruti Baleno
How to Replace the Air Filter on a Maruti Baleno
Maruti Baleno (2015-2023 / MK 2) Today, you will learn the steps to remove and replace the engine air filter on a Maruti Baleno, as well as a Suzuki Baleno, in this brief and simple …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos