Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Baleno
    4. : How do you replace the fuel filter of the Maruti Baleno?

Maruti Baleno - Video tutorial

Model: Maruti Baleno MK 2 - Years 2015-2023
Part: Petrol filter
Operation: How do you replace the fuel filter of the Maruti Baleno?

To replace the fuel filter of the Maruti Baleno, you need to lift the car so that you can access the components in the lower part. The fuel filter will be located near the left rear wheel of the car: it will be possible to remove it by disconnecting the tubes connected to it and loosening the screws that fix it to its supports. After the old filter has been removed, you can position the new one in its housing: after it has been correctly installed, you need to verify that everything is working.


Posted on 9 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos