Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Ertiga
    4. : How to change the battery on Suzuki Ertiga.

Maruti Ertiga - Video tutorial

Model: Maruti Ertiga MK 2 - Years 2018-2024
Part: Battery
Operation: How to change the battery on Suzuki Ertiga.

If we want to proceed independently to replace the battery on this car model, in the following description we will find the indications and the various steps and the correct replacement procedure. The battery is located in the engine compartment on the left side. Get a wrench to unscrew the upper support plate and then proceed to disconnect the negative pole first and then the positive one. Remove the battery from its housing and replace it with the new one, then proceed to connect the positive pole first and then the negative one and finally reattach the support plate.


Posted on 4 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos