Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Ertiga
    4. : How do you set the clock on the Maruti Ertiga?

Maruti Ertiga - Video tutorial

Model: Maruti Ertiga MK 2 - Years 2018-2024
Part: Checks and maintenance
Operation: How do you set the clock on the Maruti Ertiga?

To set the clock of the Maruti Ertiga, you need to turn on the instrument panel by rotating the key in the ignition switch. Once it is turned on, you need to hold down both buttons located on the sides of the instrument panel. By holding them down, you will notice that the number indicating the hours will start flashing, and it can be adjusted by rotating the button on the right. Once the correct hour is set, you can press both buttons again and adjust the minutes in the same way. Finally, to confirm, you need to press both buttons again.


Posted on 27 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Ertiga 2012-2018 - What problems does Maruti Ertiga present? Read Answer
    • Ertiga 2018-2025 - What are the most common Maruti Ertiga problems? Read Answer
    • Ertiga 2018-2025 - Why does the Maruti Ertiga struggle in acceleration? Read Answer
    • Ertiga 2018-2025 - What are the problems of Maruti Ertiga? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos