Do it yourself
| ||||
|
Maserati Levante - Video tutorial
Model: Maserati Levante
MK 1
- Years 2016-2023 To reset the Service light on a Maserati Levante, there is no procedure that can be done by selecting options from the onboard computer. It will be necessary to connect a diagnostic tool to the OBD port of the vehicle. This port is located in the lower left part of the steering column. Once the tool is connected, follow the instructions shown in the video by selecting the corresponding car model and version. This will allow you to reset the light, and then you can disconnect the diagnostic tool.
Posted on 9 May 2023 by ScegliAuto
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |